deliver (typical workload ETL like, long running aggregate queries,
medium size db ~100 to 200GB).
I'm currently checking the system (dd, bonnie++) to see if performances
are within the normal range but I'm having trouble relating it to
anything known. Scouting the archives there are more than a few people
familiar with it, so if someone can have a look at those numbers and
raise a flag where some numbers look very out of range for such system,
that would be appreciated. I also added some raw pgbench numbers at the end.
(Many thanks to Greg Smith, his pages was extremely helpful to get
started. Any mistake is mine)
Hardware:
Sun Fire X4150 x64
2 Quad-Core Intel(R) Xeon(R) X5460 processor (2x6MB L2, 3.16 GHz, 1333
MHz FSB)
16GB of memory (4x2GB PC2-5300 667 MHz ECC fully buffered DDR2 DIMMs)
6x 146GB 10K RPM SAS in RAID10 - for os + data
2x 146GB 10K RPM SAS in RAID1 - for xlog
Sun StorageTek SAS HBA Internal (Adaptec AAC-RAID)
OS is Ubuntu 7.10 x86_64 running 2.6.22-14
os in on ext3
data is on xfs noatime
xlog is on ext2 noatime
data
$ time sh -c "dd if=/dev/zero of=bigfile bs=8k count=4000000 && sync"
4000000+0 records in
4000000+0 records out
32768000000 bytes (33 GB) copied, 152.359 seconds, 215 MB/s
real 2m36.895s
user 0m0.570s
sys 0m36.520s
$ time dd if=bigfile of=/dev/null bs=8k
4000000+0 records in
4000000+0 records out
32768000000 bytes (33 GB) copied, 114.723 seconds, 286 MB/s
real 1m54.725s
user 0m0.450s
sys 0m22.060s
xlog
$ time sh -c "dd if=/dev/zero of=bigfile bs=8k count=4000000 && sync"
4000000+0 records in
4000000+0 records out
32768000000 bytes (33 GB) copied, 389.216 seconds, 84.2 MB/s
real 6m50.155s
user 0m0.420s
sys 0m26.490s
$ time dd if=bigfile of=/dev/null bs=8k
4000000+0 records in
4000000+0 records out
32768000000 bytes (33 GB) copied, 294.556 seconds, 111 MB/s
real 4m54.558s
user 0m0.430s
sys 0m23.480s
bonnie++ -s 32g -n 256
data:
Version 1.03 ------Sequential Output------ --Sequential Input-
--Random-
-Per Chr- --Block-- -Rewrite- -Per Chr- --Block--
--Seeks--
Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP
/sec %CP
lid-statsdb-1 32G 101188 98 202523 20 107642 13 88931 88 271576
19 980.7 2
------Sequential Create------ --------Random
Create--------
-Create-- --Read--- -Delete-- -Create-- --Read---
-Delete--
files /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP
/sec %CP
256 11429 93 +++++ +++ 17492 71 11097 91 +++++ +++
2473 11
xlog
Version 1.03 ------Sequential Output------ --Sequential Input-
--Random-
-Per Chr- --Block-- -Rewrite- -Per Chr- --Block--
--Seeks--
Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP
/sec %CP
lid-statsdb-1 32G 62973 59 69981 5 35433 4 87977 85 119749 9
496.2 1
------Sequential Create------ --------Random
Create--------
-Create-- --Read--- -Delete-- -Create-- --Read---
-Delete--
files /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP
/sec %CP
256 551 99 +++++ +++ 300935 99 573 99 +++++ +++
1384 99
pgbench
postgresql 8.2.9 with data and xlog as mentioned above
postgresql.conf:
shared_buffers = 4GB
checkpoint_segments = 8
effective_cache_size = 8GB
Script running over scaling factor 1 to 1000 and running 3 times pgbench
with "pgbench -t 2000 -c 8 -S pgbench"
It's a bit limited and will try to do a much much longer run and
increase the # of tests and calculate mean and stddev as I have a pretty
large variation for the 3 runs sometimes (typically for the scaling
factor at 1000, the runs are respectively 1952, 940, 3162) so the graph
is pretty ugly.
I get (scaling factor, size of db in MB, middle tps)
1 20 22150
5 82 22998
10 160 22301
20 316 22857
30 472 23012
40 629 17434
50 785 22179
100 1565 20193
200 3127 23788
300 4688 15494
400 6249 23513
500 7810 18868
600 9372 22146
700 11000 14555
800 12000 10742
900 14000 13696
1000 15000 940
cheers,
-- stephane
--
Sent via pgsql-performance mailing list (pgsql-performance@postgresql.org)
To make changes to your subscription:
http://www.postgresql.org/mailpref/pgsql-performance
No comments:
Post a Comment